Water is always predominant for human day to day life and there is no doubt the world is water-dependent. Compare to past decades, today water usage level is widely increased. Water scarcity is a great issue nowadays and it will continue in the future. Step up against water wastage and step for save water is necessary for today’s world.
Problem starts here - Many of us forget to turn off the water tank motor before/after overflow. At the same time, we are missing to fill up water in the tank at the right time. In fact, nobody has known about how much of water we consume every day and how much of water we waste every day. EZZTANK is one of the greatest technological finds against water wastage at homes.
Climate change, increasing water scarcity, population growth, demographic changes and urbanization already pose challenges for water supply systems. By 2025, half of the world’s population will be living in water-stressed areas. Re-use of wastewater, to recover water, nutrients, or energy, is becoming an important strategy.
- World Health Organization
Based on real-time water issues at homes, EZZTANK - Wireless water tank level management systems are engineered. It is a completely wireless IoT products with almost zero Installation and maintenance. It supports the users by getting rid of the hassles of wiring, connecting the sensors. The solutions also, automatically, calibrates the tank level to suit the different needs and comes with four different models
EZZTANK – Water Level Monitor is a complete wireless, plug and play solution. Mainly, designed for water tank level monitoring and level alerts. The tank water level will be automatically calibrated with 1cm accuracy. The solution comes with Floatable Sensor Unit, Display Unit and Android application support.
Ultrasonic based floatable sensor. The users have to insert the battery into the device and drop it into the water tank.
The floatable sensor measures the water level in the unit of centimeters and transmits the level data through wireless to the display unit.
The device needs 6 Numbers of AA alkaline battery, which shall last for 6 months depends on the configuration.
Plug and play, display unit. The users can plug it in the standard 230V 3pin 5A power socket. The system actively displays the water level data and produces respective alerts based on the user setting based on the water level data received from the sensor unit.
The device can work in online (with internet) and offline mode (without internet). Through this device, users can monitor 1 to 4 sensor units, set various full and empty levels in centimeter-level for each and induvial storage tanks, and this can be changed whenever they want to change.
The device shows the battery level of each sensor unit and the user gets an individual sensor low battery alarm.
During the initial setup of users can configure the device in online or offline mode.The users have to re-configure the device after changing the previous mode.
Any time the user can change these modes. With the device, users can get alert if the tank is not clean and they can check the tank leakage.
The users need to have internet connection, download the android mobile app to configure the WIFI network and water level etc of this display unit. In online mode user can view the water level from remote location. In online mode the device posts seamless data and various alerts of water level to the server.
No need to internet connection, The users can configure the display unit through their smart phone using the hotspot of the phone and view the water level and configuration details within the range 5 to 10 meter of the display unit.
EZZTANK – Water Level Controller is mainly designed for control the water level in a water tank by controlling the pumping motor. The water tank level will be calibrated by the floatable sensor unit. Based on sensor data, pumping motor is controlled by the motor/pump control unit.
For installation of the motor/pump control unit, the users have to cut and link the motor/pump unit in between of switch and water tank motor.
Ultrasonic based floatable sensor. The users have to insert the battery into the device and drop it into the water tank.
The floatable sensor measures the water level in the unit of centimeters and transmits the level data through wireless to the display unit.
The device needs 6 Numbers of AA alkaline battery, which shall last for 6 months depends on the configuration.
EZZTANK - Motor/Pump control unit operates on 220VAC mains with near zero installation, it will automatically control the 220V AC single phase motor/ pump as per the empty and full water level settings.
The device can work in online (with internet) and offline (without internet). In online mode the device posts seamless data and various alerts of water level to the server.
The device use can monitor one sensor unit water level of the storage tank and battery level, these parameters can also be viewed through the mobile app or through the hot spot connection of user mobile with the device.
Also, the product has motor protection mechanism against over voltage, under voltage, over current, and dry run.
During the initial setup of users can configure the device in online or offline mode.The users have to re-configure the device after changing the previous mode. Any time the user can change these modes. With the device, users can get alert if the tank is not clean and they can check the tank leakage.
The user need to have internet connection, download the android mobile app to configure the WIFI network and water level etc of this display unit. In online mode user can view the water level, battery level of senor unit, control the motor/pump from remote location.
No need to internet connection, The user can configure the motor control unit through their smart phone using the hotspot of the phone, can view the water level, battery level of senor unit, control the motor/pump within the range 5 to 10 meter of the motor/pump control unit.
Timer based water level controller operates on 230VAC mains and handles maximum load capacity of 3KW. Automatically control the motor unit of the water tank based on configured time by the user. It comes with motor protection mechanism against over voltage, under voltage, over current, and dry run.
Note: The system is also be used for control other electrical devices.
During the initial setup of users can configure the device in online or offline mode.The users have to re-configure the device after changing the previous mode. Any time the user can change these modes. With the device, users can get alert if the tank is not clean and they can check the tank leakage.
The user need to have internet connection, download the android mobile app to configure the WIFI network and water level etc of this display unit. In online mode user can view the water level, battery level of senor unit, control the motor/pump from remote location.
No internet connection needed, The user can configure the motor control unit through their smart phone using the hotspot of the phone, can view the water level, battery level of senor unit, control the motor/pump within the range 5 to 10 meter of the motor/pump control unit.
GSM based ultrasonic floating sensor. The user need to insert the SIM and AA alkaline battery. Configure the device with the Empty, middle, full level of the water tank in centimetre and drop it into the water storage tank.
The device automatically calibrates the level by itself and starts measuring the water level when it is dropped inside the storage tank and sends the water levels as per the configured level alerts through SMS using the GSM connectivity.
This model is not recommended for concreate, metal or any other storage tank were user cannot get the GSM network.
GSTIN: 33AAGCC5155M1Z
CIN : U72900TZ2016PTC027665
Email :sales@comtustec.com.in
Request A Enquiry